Heating & Air Conditioning
Elite Property Maintenance delivers lasting HVAC fixes—not band-aids—across the OKC metro. They diagnose the real issue, explain options in plain English, and do the job right the first time. With integrity and craftsmanship, they leave systems running clean, quiet, and efficient.
OKC Heating & Air — Fast, Honest Repairs & Installs
Serving Oklahoma City, Edmond, Norman, Moore, Yukon, Mustang, Nichols Hills, Bethany, Midwest City, The Village, Newcastle & Spencer.
24/7 HVAC Repair You Can Trust
No band-aid fixes. We diagnose the real issue and make it right — clean, quiet, efficient.
Services & Starting Prices
Transparent pricing. Final quote depends on access, parts, permits, and scope.
AC Leak Detection & Repair
Refrigerant or condensate leaks
What you get
- Dye/electronic leak check
- Drain flush & float switch test
- Repair options + recharge if needed
Poor Airflow / Uneven Cooling
Hot/cold rooms solved
What you get
- Duct/leak/balance check
- Filter/coil/ECM assessment
- Damper & zoning options
Odd Smells from Vents
Musty • Burning • Sour
What you get
- Drain/pan/coil inspection
- Heater safety sniff test
- Sanitize & odor solutions
Gas Furnace Leak Detection & Repair
Gas & CO safety first
What you get
- Combustion & CO testing
- Leak isolation & repairs
- Draft & vent verification
Thermostat Installation
Smart & programmable
What you get
- C-wire/adapters as needed
- App pairing & schedules
- Walkthrough & labeling
System Install (AC/Furnace)
Permits & haul-away
What you get
- Load calc & right-sizing
- Permit, install, cleanup
- Warranty + startup tune
Pool Heater Repairs
Gas & electric units
What you get
- Ignition & flow checks
- Sensor/board diagnostics
- Season-start tune options
AC Drain Line Cleaning
Stop overflows & leaks
What you get
- Vacuum/flush & trap clean
- Algaecide tabs & test
- Drain safety switch check
Emergency Heat Repairs
Priority in freezing temps
What you get
- Rapid diagnosis & safe-up
- After-hours available
- Clear fix options on-site
Ignitor / Flame Sensor Repair
Reliable, safe ignition
What you get
- Sensor clean or replace
- Ignitor ohm/amp test
- Combustion verification
Why HVAC Maintenance Saves You Money
Catch failures early, lower bills, and extend equipment life.
Catch Expensive Repairs Early
Capacitors, coils, and drains give warnings. We fix issues before they cascade into major failures.
Lower Utility Bills
Clean coils, correct charge, and healthy airflow mean shorter run times and less strain.
Extend System Life
Well-maintained equipment reliably hits 15–20 years; neglected units don’t.
Prevent Home Damage
Cleared drains and proper airflow protect ceilings, walls, and insulation from moisture.
Ready to Cut Costs & Headaches?
Book a tune-up — we’ll map out quick wins for safety, comfort, and efficiency.
What to Expect When You Call Elite
Simple, clear, and done right — start to finish.
Want HVAC to Be Easy?
Tell us what’s going on. We’ll handle diagnosis, parts, permits, and a clean, safe finish.
Click the pic to find out — our latest blog.
Need Heating or AC Help Today?
Fast help for no-cool/no-heat, leaks, odd smells, thermostat issues, installs and more — with clear pricing and guaranteed work.
Why Choose Us for HVAC
Clear pricing, clean workmanship, and fast, licensed pros serving Oklahoma City, Edmond, Norman, Moore, Yukon, Mustang, Nichols Hills, Bethany, Midwest City, The Village, Newcastle & Spencer.
Certified techs, no band-aid fixes
We find and fix the root cause — refrigerant, airflow, electrical, and safety — so your system runs clean, quiet, and efficient.
HVAC FAQs for OKC Homeowners
Straight answers for Oklahoma City, Edmond, Norman, Moore, Yukon, Mustang, Nichols Hills, Bethany, Midwest City, The Village, Newcastle & Spencer — with 24/7 emergency help when you need it.
Likely airflow, refrigerant charge, a dirty coil, or a failing capacitor. We check temps, pressures, filter/coil condition, blower speed, and thermostat settings, then fix the root cause — not just add refrigerant.
Low refrigerant is one cause, but clogged filters, weak blowers, or dirty coils also create ice. We thaw safely, test airflow and charge, find any leaks, and correct the real issue.
Yes — turn off the system and the condensate safety switch if present. Drain lines clog and pans rust. We clear the line, treat algae, verify the float switch, and prevent ceiling damage.
Musty often points to drain/coil issues; burning can be dust on heat strips or an electrical problem. We inspect the coil, pan, heater, and blower, then sanitize and repair as needed.
Yes. No-cool/no-heat, leaks, frozen coils, or safety concerns — we make it safe and restore comfort ASAP. After-hours diagnostics are available.
Standard 1" filters: every 30–60 days. 4–5" media: every 3–6 months. Check more often with pets, dust, or construction. A clean filter protects coils and keeps bills lower.
Coil and blower inspection, temperature split, refrigerant pressures, capacitor/amp tests, drain flush and safety switch test, thermostat check, and written recommendations.
AC in spring; heat in fall. If you missed one, do it now — maintenance prevents surprise breakdowns during extreme weather.
Yes — setbacks and schedules reduce run time, and many models improve dehumidification and comfort. We install, wire C-adapters if needed, and set up the app.
Usually. We measure airflow and static pressure, check duct size/leaks, balance dampers, and adjust blower profiles. Zoning or duct fixes often solve uneven rooms.
If indoor RH stays above ~55%, a dehumidifier or variable-speed system improves comfort, protects finishes, and helps allergies. We’ll size and integrate with your ductwork.
They help when ducts are dusty, leaky, or after renovations. We start with a duct/return inspection and recommend sealing, filtration, UV, or cleaning based on what we find.
MERV 8–11 works for most homes. Higher MERV can restrict airflow if the system isn’t designed for it. We’ll match filter type to your blower and duct static pressure.
We look at age, repair history, efficiency, and refrigerant type. If repairs exceed ~30–40% of replacement and the unit is older, replacement may be the smarter long-term move.
Quieter, better humidity control, more even temps, and lower bills. They run longer at low speed instead of short, loud bursts.
Yes — ductless heat pumps are perfect for add-ons and hot/cold spots. We size, mount cleanly, and set up Wi-Fi control.
Most replacements finish the same day with permit and haul-away included. Complex duct changes may take an extra day.
Yes — licensed, bonded, and insured. We pull permits when required and meet local code for safe installs and repairs.
We provide detailed diagnostics and invoices so you can submit claims. If warranty coverage falls short, we’ll give clear options and pricing.
Turn the system off, note any sounds/smells, and clear a path to the unit and panel. If water is leaking, place a pan/towel and turn off at the thermostat.
Want fast, honest HVAC help?
No-cool/no-heat, uneven rooms, leaks, smells, or a new system — we’ll lay out clear options and upfront pricing.